This Pressing Machine is type of Flour Column and Three Board, the upmost output tonnage is 20t. It can be adjusted among the range of 5t-20t according to the different products’procedures, the purpose is to arrive the best required output. Cylinder Stroke is 200mm, (slide stroke is 200mm). And the dimension of effective working surface is 500mm*400mm, the close height is 200mm. Well, our DR-20T Pressing Machine has two types, manual operation and automatic operation, meanwhile, it can count and timing automatically, safe and protective. In addition, our DR-20T Pressing Machine’s middle plate and lower plate open two-article T-slot respectively, the pressure system is rear-mounted and the below equips with horizontal floor mat.
Hydraulic Pump: the reforming plant which shift the mechanical energy into hydraulic energy.
Hydraulic Cylinder: shift the hydraulic energy into the mechanical energy.
Control Valve: control the flow, flow direction, pressure, hydraulic executing agency work order of hydraulic oil, thus to control actuator’s motor direction, moment of force, working speed, order of execution and limit/control the working pressure of the hydraulic system, to protect the overload’s phenomenon. (such as one-way valve, reserving valve, overflow valve, reducing valve, sequence valve, throttle valve and speed control valve, etc.)
Rawhide Bone Pressing Machine Rawhide Bone Pressing Machine could produce pet chewing bone with cowhide, pigskin or sheepskin as material. It could press the material to be various shapes and sizes.
Dog Chew Bone Machine has high press speed to increase efficiency. Chewing Bone Machine’s middle plate and lower plate open two-article T-slot respectively, the pressure system is rear-mounted and the below equips with horizontal floor mat.
This Dog Bone Machine is type of Flour Column and Three Board, the up-most output pressure is adjustable.
Equipped with safety sensor to ensure the operator’s safety.
Also the foot press pedal is double-layer design to prevent any misoperation. The parts are processed by CNC boring and milling machine, the gears are processed by German gear grinding machine.
The crankshaft, gear tooth and other friction parts are made of alloy steel, annealing process.
Pneumatic dry-friction clutch & brake, low noise, and long service life (wet clutch&brake is available).
Emergent stop, inching, single and continuous movement.
The pressed cowhide dog bone machine with good safety design. While the workers place the materials or take out the final product, the bottom mold can be moved outward, so the workers is not under the upper mold. Only after the worker leave the machine, the machine should be allowed to start by pressing the two palm buttons.
The pressed cowhide dog bone machine has two types, manual operation and automatic operation, meanwhile, it can count and timing automatically, safe and protective.
Working surface size
Left and Right 500mm
Working surface size
Front and Back 400mm
Height of Working Table to the Ground
Max. Stroke of Mobile Mould
2500 x 1200 x 1900mm
The popular size is 60mm, 10mm, 150mm, 200mm, 250mm, 300mm, the cavity per mold is different according to the size. We can also customize the shape and size as request.
Why Choose Us?
1. Siemens or Lijiu motor, one years worldwide guarantee
2. Siemens PLC and touch screen to control the whole line, all faults will display on the touch screen
3. ABB or Schneider or DELIXI electric parts
4. China famous brand bearings
5. All parts touch with raw materials or final products are made of stainless steel 304
6. 24V operation voltage, assure the safety of operators
7. Three kinds of protectors to keep machine and operator safe: over-heating, over-current, over voltage.