Rawhide Bones Making

Rawhide Bones Making

Rawhide Knotted Bone Chewing Pet Food Equipment can produce pet chewing bone with cowhide, pigskin, beef tendons or sheepskin as material. It could press the material to be various shapes and sizes.

Product Details

Product Description
Rawhide Knotted Bone Chewing Pet Food  Equipment can produce pet chewing bone with cowhide, pigskin, beef tendons or  sheepskin as material. It could press the material to be various shapes and  sizes.

Number

Description

1

Germany motor, three years worldwide    guarantee

2

                    Double-station, double molds, it can    improve the efficiency

3

                    Touch screen with Schneider electric parts

4

                    Wide range of application, the material    can be used cow hide,Sheepskin, pig skin,Fish skin.

5

                    You can adjust the size of your products,    it is easy to change the molds

6

                    Simple operation with good safety    protection


The identity of rawhide dog chews:
1) Size: 2.5"-12.5"
2) Material: rawhide
3) Appearance: natural, bleached, smoked
4) Packing: PVC (PE)bag and header card
5) For all kinds of pets
6) Prompt healty teeth


Features
1. It is type of Flour Column and Three  Board, the upmost output tonnage can be adjustable.
2. It can be adjusted among the range of  5t-60t according to the different products’ procedures, the purpose is to  arrive the best required output.
3. Well, our DR-60T Pressing Machine has two  types, manual operation and automatic operation, meanwhile, it can count and  timing automatically, safe and protective.
4. In addition, our DR-60T Pressing Machine’s  middle plate and lower plate open two-article T-slot respectively, the pressure  system is rear-mounted and the below equips with horizontal floor mat.
5. After pressing, the mold plate can be  moved outside, so that it could well protect the operator’s safety.

Commissioning  Service
1. We make accurate factory layout design  according to customer’s factory size; if the customer needed, we could make  workshop design with electricity power, water supply, gas power, material  storage, final storages, worker’s restroom, etc.
2. After delivering machines to client’s  factory, we start to apply for the Visa to client’s country immediately;  normally the vessel needs 20-60 days to the required port, so we have enough  time to get the Visa. While the machines arrives your factory, our engineers  are ready to start for the commissioning service.
3. 1-2 of our engineers will go to your  factory to install and adjust the processing line to realize normal production  at shortest time.
4. Our engineers have responsibility to  train and teach the workers how to operate, clean, maintain and repair all the  machines, until the workers could well operate the processing line.
5. It normally costs 10 days for the  commissioning
service, and we supply 1 year guarantee  from the date of completion of commissioning service.
6. The engineer’s round-trip flight  tickets, accommodation and daily salary USD 100 are on client’s account.


Pictures


Send Inquiry