Safety hazards and preventive measures in pet food production equipment

Flywheel without safety shield

The flywheel lacks a safety cover, handles accidents accidentally or in an emergency, and it is easy to twist the worker's clothing into the belt that rotates at high speed. It also causes the foreign matter falling on the belt to be present with the belt running at high speed. Staff, causing unnecessary harm.

The bearing length of the inlet is unreasonable

Due to the unreasonable length, the raw materials transported by the automatic feeder contain metal materials, especially iron impurities. For example, screws, gaskets, iron blocks and other feeds quickly enter the pulverizer, and the sieves and hammers are broken. Directly penetrate the body, posing a direct threat to the safety of the staff.

Small material inlet has no dust cover

The small material is filled with some fine raw materials, such as mineral additives, vitamin additives, etc. Before these materials enter the mixer, it is easy to be absorbed by the human body. Long-term inhalation will cause discomfort such as chest tightness, dizziness and nausea. Symptoms can seriously affect your health.

Pet feed production equipment preventive measures

In view of the above situation, in addition to doing a variety of safety checks and personal protection before starting, the following methods will receive good results. The protective cover with excellent texture can effectively avoid accidental injury, lengthen the length of the inlet plate to 80cm~100cm, and add a row of magnets at a distance of about 40cm from the inlet below the load plate, which can effectively prevent Damage and danger caused by iron impurities entering the pulverizer. Add half of the closed cover plate at a height of about 30 cm to 40 cm at the feed opening of the small material, so that it is convenient to add a large amount of raw materials, such as fish meal, stone powder, etc., and also can prevent the spread of dust.